posted by Matt on Apr 15
Kamasan Black Cap Feeders are an excellent maggot feeder, as unlike some maggot feeders little or no bait usally remains even after a short period in the water.They are available in three sizes and four weights.>
Archive for the ‘Weights’ Category
posted by Matt on Feb 4
Plain Nose Cones Only (lead not included) These are made of from a soft 1.2mm stainless steel wire and holds well in strong currents. But unlike the previous two, this wire will give against snags upon retrieval, making it suitable for beach fishing. Once reeled in, the wires can be re-shaped (again and again).>
posted by Matt on Feb 4
These are made of a thinner 1.2mm sprung stainless steel wire and are ideal for pier and boat fishing. They grip hard and on retrieval will spring out from it’s anchorage, but, like the ‘DD’ it does require the lift as from a boat or pier. Assembly Kit (4 pack)>
posted by Matt on Feb 4
Standard Grip Kit Long tail wires Red (10)>
posted by Matt on Feb 4
The Gemini System 100+ contains a 90g – 210g adjustable mould, assemblies to make 10 sinkers and complete moulding instructions. Contents: Sinkers;Accessories; 2 x black heads1 x adjustable mould 2 x yellow heads1 x mould spacer 2 x red heads1 x DD fixed grip wire 3 x blue heads1 x Springy fixed grip wire 1 x green heads2 x A.S. fixed grip wire 7 x long tail wires1 x long uptide insert 3 x short tail wires3 x short uptide insert 4 sets of standard grip wires4 x black heads 4 sets of long grip wires sufficient4 sets of extra long grip wires coloured pvc tubing for grips4 sets of side grip wires (use in sand for stronger grip)4 x plain nose cones>
posted by Matt on Feb 4
These kits contain the Uptide Inserts, break-out nose cones, extra long grips (56mm reach) and p.v.c. sleeving.>
posted by Matt on Jan 26
Side grip Assembly kit. These are the more traditional shape of side wire (in black).>
posted by Matt on Jan 26
The unique design of the Gemini breakout sinker has distinct advantages over conventional break-out grip sinkers, other than the inter-changeability of the heads. Because the nose cone places the grips in front of the mass of the lead sinker, this alters the centre of gravity, bearing greater pressure on the grips into the sea bed. (To test this, place a Gemini sinker alongside a conentional style sinker of equal weights, then, in turn, place your finger on the nose cone and push backwards. The Gemini sinker will be noticeably harder to push.>
posted by Matt on Jan 26
These contain only the inserts to be fitted between the sinker and nose cone of all Gemini sinkers.>
posted by Matt on Jan 20
These contain only the inserts to be fitted between the sinker and nose cone of all Gemini sinkers.>
posted by Matt on Jan 20
This pack contains everything to get you up and running to produce your Gemini sinkers. The concise instruction sheet, containing a step by step guide of casting techniques and guides for safety, will see you through the satisfaction of making your own weights with the minimum of fuss.>
posted by Matt on Jan 20
Replacement Spacer for System 100+ Adjustable Mould>
posted by Matt on Jan 16
Zebco: Quantum Flat Pear Lead 50g 2 Pack>
posted by Matt on Jan 16
Zebco: Quantum Flat Pear Lead Weight 110g 2 Pack>
posted by Matt on Jan 14
These are made of from a soft 1.2mm stainless steel wire and holds well in strong currents. But unlike the previous two, this wire will give against snags upon retrieval, making it suitable for beach fishing. Once reeled in, the wires can be re-shaped (again and again). Assembly Kit (4 pack) (head unit only – no tail wires)>
posted by Matt on Jan 14
These are made of a thick 1.4mm strong stainless steel wire that does not give or bend in use. On retrieval, it has to be pulled from its anchorage up to the boat or pier without encountering snags. Tip! If you can’t hold with this one, pack up and go home! Assembly Kit (4 pack) (head unit only – no tail wires)>
posted by Matt on Jan 13
The unique design of the Gemini breakout sinker has distinct advantages over conventional break-out grip sinkers, other than the inter-changeability of the heads. Because the nose cone places the grips in front of the mass of the lead sinker, this alters the centre of gravity, bearing greater pressure on the grips into the sea bed. (To test this, place a Gemini sinker alongside a conentional style sinker of equal weights, then, in turn, place your finger on the nose cone and push backwards. The Gemini sinker will be noticeably harder to push.>
posted by Matt on Jan 7
A excellent standard stainless steel long tail, ideal for the Diy lead maker.>
posted by Matt on Jan 7
A excellent standard stainless steel short tail, ideal for the Diy lead maker.>
posted by Matt on Jan 7
Gemini Mould Clamp When making Sinkers, the two halves of the mould must be firmly clamped together and for this, there is the system100+ Mould Clamp a sturdy bracket designed to securely hold and easily release the Gemini Mould.>
posted by Matt on Jan 7
Plastic Rollers ideal for the DIY Lead Maker>
posted by Matt on Jan 5
Fox Maggot Method Feeder 28g Small A revolutionary method feeder system: Allows groundbait and maggots to be combined Foam inserts can be loaded with liquid attractors Weight forward bolt rig system Nose takes size 7 Fox swivels>
